Skip to product information
1 of 1

Veilmoor

13 ft Pinstripe Skeleton Animatronic

13 ft Pinstripe Skeleton Animatronic

Regular price $169.00 USD
Regular price $329.00 USD Sale price $169.00 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
Bundle
Quantity

156 in tall · indoor / outdoor

13 ft Pinstripe Skeleton Animatronic

Thirteen feet of animated skeleton for the yard: two swappable heads, bones that light up after dark, and a motion sensor that wakes it.

Full-body shot of the tall pinstripe animatronic figure on a front lawn beside a house, arm raised in a wave.Close crop of the wide black bat-shaped bow tie against a white collar and pinstripe lapel.Three-quarter shot of the calm painted head and shoulders of the animatronic figure in daylight.Three-quarter shot of the second, more dramatic painted head fitted on the same figure.Macro of a long thin white gloved hand with dark joint lines against a pinstripe sleeve.The tall animatronic figure silhouetted against a deep indigo dusk sky on the front lawn.The figure's head glowing with cool blue-violet LED light against a fully dark yard at night.Overhead plan diagram of a motion-detection cone spreading across a front walkway toward the figure.The figure cut out on a pale ground with a violet audio waveform running beside it.Studio macro of the black control box with its volume dial at the base of the figure.Size diagram: the figure at 13 ft beside a grey adult silhouette and a house roofline.Flat panel with a power adapter and coiled cord running to a wall outlet.Four build stages of the figure side by side, from bare base to finished figure.Overhead flat-lay of the figure's parts neatly organized in labeled foam tray slots.The figure standing among a full decorated front yard display in late afternoon light.The figure standing beside a decorated front porch at dusk with string lights coming on.The figure's head glowing at night in an otherwise dark foggy front yard.Wide view from across the street: the tall figure visible above the roofline of a decorated house.Studio arrangement: the figure above a row of three companion props joined by thin violet lines.A single black stake spotlight on a pale ground with the tall figure out of focus behind.Flat line-art panel: a shipping carton, a map of the United States and a calendar page.Flat line-art panel: an open box with a curved return arrow looping into it.Spec sheet: the figure cut out on the left, a five-row table on the right.The figure cut out low on a pale ground, arm raised, under the closing headline.

Side by side

13 ft Animatronic 12 ft skeleton animatronics 6-7 ft porch animatronics
Height 13 ft 12 ft typical 6 to 7 ft
Head Two swappable heads One fixed head One fixed head
Lighting Color-changing LEDs Single-color eyes Single-color eyes or none
Trigger Motion sensor Motion sensor or step pad Step pad
How you get it Delivered to your door Delivered to your door Delivered to your door
Price $169.00 $220 to $280 $79 to $150

Specs

Height 156 in
Weight 44 lb
Motion Motion Sensor
Power Plug-In 120V
Setup 40 min
Use Indoor / Outdoor
Material fabric, foam, metal and electronics
Scare level Family friendly

Questions people ask

How tall is it, really, next to my house?

Thirteen feet from the base to the top of the head, which is taller than most single-story roof lines. Plan for open lawn, not a porch corner — the raised arm alone swings out past a doorway. Most people put it on the front lawn a few feet off the walkway so the height reads from the street.

What do the two heads change?

One head has a calm, friendly painted expression; the other has a wider, more dramatic one. Both snap onto the same neck joint, so swapping takes under a minute — people tend to run the friendly face for trick-or-treat hours and the dramatic one for the rest of the season.

What happens when the motion sensor goes off?

The head turns and the jaw moves while it plays through a short tune, and the color-changing LEDs along the head and chest shift through their cycle. It resets a few seconds after motion stops, ready to trigger again for the next person who walks up.

Can it stay outside for the whole season?

Yes — it is built for the yard, with weather-resistant fabric over a powder-coated metal frame and a sealed control box at the base. Stake it down in open wind the same way you would any tall lightweight yard prop; it is not rated for standing water or being submerged.

How much assembly, and can one person do it?

About 40 minutes, and it goes faster with two people — the torso is light but awkward to hold upright alone while the base bolts on. It arrives in labeled sections: base, leg poles, torso, both arms, both heads and the power adapter, all pre-wired.

How does it power on?

It plugs into a standard outdoor-rated outlet with the included 10-foot cord — no batteries. If your spot is farther than that from an outlet, a standard outdoor extension cord is all you need.

Does the volume have a low setting?

There is a dial on the control box at the base, so you can run it at background level for a quiet street or turn it up for a yard that's already loud with other props.

When does it arrive, and does it pack back down?

Five to seven business days from the US, three to four on express. It breaks back down into the same labeled sections it arrived in, so it goes back in its box on November 1st instead of taking up a closet fully assembled.

Shipping and returns

Shipping
Standard: 5–7 business days, free over $99. Express: 3–4 business days.
Returns
30 days from delivery, unused and in the box. Damaged on arrival: photo + order number and we replace it first.
Halloween cut-off
Order by Tue, Oct 20 (standard) or Fri, Oct 23 (express) to have it in the yard by the 30th.
View full details